The weekend we raised our yurt this past summer was one of the most wild experiences of my life. Post-weekend, my knuckles were swollen, I would wake up nightly to unconsciously scratching of mosquito bites on my legs, and I had a handful of cuts and bruises that lasted a few weeks. But at the end of the day, we had a yurt!
The whole experience was, for the most part, smooth. It was challenging — yes. It was time consuming. But it was fun! And it was rad that we had friends come out and help with various parts of the raising. From hands-on help from the start, to homemade mojitos and jalapeño poppers mid-day, borrowed tools and a trailer, responses to frantic text messages… all the kindness from our support network here in Montana was slightly overwhelming.
For one, I learned that yurts are totally beginner friendly. With a little common sense and planning ahead, I really think anyone can do it. Our advantage came from first disassembling the yurt from the woman we purchased it from, and then building it back up again.
Initially, we called Hayes, the owner of Shelter Designs in Missoula, and asked him if we could hire him for the yurt raising, as the yurt we purchased was a Shelter Designs yurt. There are a lot of moving parts, and Hayes is a great crowd organizer… he knows what needs to get done. Obviously, he does this for a living. When Sean asked him, Hayes basically said (paraphrasing here), “I’m pretty busy this summer, but I think you guys can handle it. I’ll send you a DVD.”
I thought… A DVD. Really? What are we doing here, baking cookies or building a house?
But when we actually watched the DVD, we knew Hayes was right. It explained everything from start to finish, with super detailed instructions—exactly the things he would have been telling us had he been here. So we would do a few tasks on the yurt, and then watch some DVD on a laptop… go back to yurt stuff, have lunch, and watch a little more DVD. That got us through it. That DVD was the key to building our yurt.
Here are a few shots from the big day. Arranging the windows, doorways and lattice walls:
Our buddy Mikey, placing the tension cable through the tops of the lattice walls:
The cable is made to fit our 30-foot yurt EXACTLY. Thus, it takes a bit of time to wiggle it through the lattice walls perfectly enough for this hook to actually lock.
Brandon, Sean and Mikey, prepping to lift that ring (at their feet) above their heads and start placing the beams, which connect to the outer lattice walls. This is the most dangerous part of a yurt raising… those beams are heavy!
A nervous smile from me on the ground. My job was to run around the yurt like a crazy woman, handing the guys one end of a beam, and placing the other end of the beam on the cable in the precise spot. Luckily, we only had a few tense moments, one of which involved a beam nailing me in the arm. I had a massive bruise to show for that one.
Until the first five (maybe six) beams are up, it’s super tense because someone always has to be holding that ring up (which weighs a ton). It was a lot of arms-over-the-head action for those guys.
Once the beams are in, it’s fun to put on the white lining (1st layer) and the insulation (2nd layer). Although, we were pretty lucky the sun was behind a cloud during this part… that insulation is like one big sun screen!
Here was the HARDEST part of the day. Even harder than putting in the beams. That crescent roll up there is the outer canvas of the yurt and it weighs a million pounds. Maybe not a million, but it sure seemed like it. It took 4 of us to hoist it up to the scaffolding, and then a lot of grunting and groaning to get it out of the center ring and onto the roof. I won’t even go into the madness involved with trying to spread that thing out around the yurt. Again, if you’re building a NEW yurt, your canvas comes nice and folded — like, the size of a sleeping bag — and you roll it down easily over a designated opening. With ours? It was a bit of a jumble to get it looking good. It took us about three hours on just on this part.
And after getting the top on, we had to then put on the side insulation panels and the side canvas panels. They were heavy, but nowhere near as heavy as the top. This part was also difficult because our yurt is so high off the ground, and we had to use lean-to ladders (as opposed to the A-frame ladders) to get as high as the top. Eventually, we splurged and bought a 12-foot ladder — which is KEY for 30-foot yurt maintenance.
Then there was the dome, being pulled up the outside to the top:
And then, behold the yurt in all her glory after the final pieces of the structure were on! All in all, these steps took us 1.5 days to complete. Yes, it’s THAT easy!
Sean & Mollie Busby are Osprey Packs Ambassadors. Sean is a professional backcountry snowboarder. In 2004, while training for the 2010 Olympics, Sean endured a complicated diagnosis of type 1 diabetes. Considering leaving snowboarding all together, Sean was inspired by reading stories of kids living with T1D that inspired him to keep living his dreams. He founded Riding On Insulin, a nonprofit, to honor all the kids who inspired him to keep living. In February 2014, Sean became the first person with T1D to backcountry snowboard all seven continents at the age of 29 in 2014. Mollie Busby graduated from the University of Wisconsin-Madison with degrees in Journalism and Retail. A series of life-changing events brought Mollie and Sean together in February 2010, and after five months, Mollie moved west. The pair was married in September, 2011 and now resides in a 30-foot yurt with their dogs, Daisy and Glacier, in Whitefish, Montana. For more, visit Two Sticks and a Board online, or follow Sean and Mollie on Instagram.